- Character size from 12 to 25 mm
- good readability thanks to unmistakeable character design
- application possible on rough surfaces
Technical Characteristics
Totally reengineered marking heads for high performance even in harsh steel plant environments. Equipment manufactured using standardised modules, resulting in high reliability and low maintenance of equipment. Forced air cooling maintains low ambient temperatures within marking unit.
Economical and technical benefits
Low overall costs, electro-pneumatic operation, very low running costs and no consumable costs. Good legibility with unmistakable full single character stamp. Stamped marks offer long durability of identity.
Technical Design
Machine frame is a robust fabricated construction with maintenance-free linear rails, electrical drives with servo motors, gears and racks, pneumatic cylinders and cable tracks. Stamping with simple pneumatic impact cylinder.
Control systems (standard Siemens S7 PLC) feature standard interfaces with plant equipment and fault diagnosis systems.
Options
- Stamping in two lines
- Product edge detection
- Clamping device
- Other control systems (Allen Bradley, etc.)
Technical data:
| General data |
| Usual applications |
Continuously cast and mill products (slabs, blooms and billets) |
| Temperature range of product |
600°C – 1,000°C |
| Type of mark |
Stamped |
| Marking data |
| Character size |
12 – 25 mm |
| Number of lines |
1 or 2 |
| Typical marking cycle time |
Approx. 12 sec for 10 characters in one line |
| Electrical |
| Mains supply |
3 x 400 V, 50 Hz (other voltages also possible) |
| Power consumption |
Approx. 7 kVA |
| Control voltage |
24 VDC |
| Pneumatic |
| Compressed air |
Filtered and drained |
| Pressure |
Min. 5 bar |
| Consumption (flow rate) |
Max. 0.3 Nm³/min |
Image Gallery:
References
