- Character size from 12 to 25 mm
- good readability thanks to unmistakeable character design
Technical Characteristics
New technology based on proven NUMTEC-INTERSTAHL RH stamping technology. Automatic marking of machine-readable codes on your products. Optimal stamping technology for high reliability with quick and easy maintenance. Forced air cooling to maintain low ambient temperatures within the stamping unit.
Economical and technical benefits
Automatic reading of your product during all subsequent production steps. Fully automatic central product identification before the rolling mill process.
Combination of man-readable characters and code makes both human reading and automatic product scanning possible.
Technical Design
Machine frame is a robust fabricated construction, maintenance-free linear guide rails, electric drives with servo motors.
Control systems (standard Siemens S7 PLC) with standard interface to plant equipment, fault diagnosis systems.
Robust and reliable reading systems designed to function in harsh steel plant environments.
Options
- Product edge detection
- Other control systems (Allen Bradley, etc.)
Technical data:
| General data |
| Usual applications |
Continuously cast and mill products (slabs, blooms and billets) |
| Temperature range of product |
700°C – 1,000°C |
| Type of mark |
Alphanumeric and code, stamped |
| Marking data |
| Character size |
12 – 25 mm |
| Number of lines |
2 – 3 |
| Code size |
One or two lines, depending on code format |
| Typical marking cycle time (numbers only) |
Approx. 12 sec for 10 characters in one line |
| Typical marking cycle time (numbers and code) |
Approx. 30 sec for 10 characters 2 liner code |
| Electrical |
| Mains supply |
3 x 400 V, 50 Hz (other voltages also possible) |
| Power consumption |
Approx. 7 kVA |
| Control voltage |
24 VDC |
| Pneumatic |
| Compressed air |
Filtered and drained |
| Pressure |
Min. 5 bar |
| Consumption (flow rate) |
Max. 0.3 Nm³/min |
Image Gallery:
References
