Distortion Measurement directly after casting
With this system you can measure the distortion of your wheels directly after the casting process. Save time and money by not machining wheels that are out of tolerance. Check and control your casting process with the NUMTEC scanning system online. The wheels will be measured only a few minutes after casting, this will give you a unique possibility to monitor online your casting process.
DISTORTION MEASUREMENT
Includes a fully laser based measurement system for distortion, no mechanical measurement equipment required.
BARCODE - SCANNING
For mixed production. The best option is to use NUMTEC SCANBC Barcode scanning system
MIXED PRODUCTION
The machine operates automatically with different wheel types, for fully mixed production.
TREND ANALYSES
The distortion values are stored in the system. With these values over the time, trend analysis of your casting process can be made.
Technical data:
| Distortion scanner: | |
|---|---|
| Scanning type: | Laser – Sensor, triangulation type, 2 units |
| Measurement points per wheel: | typ. 8 |
| Cycle time per wheel: | 8 seconds, incl. transport time of wheel on roller table |
| Software, data input: | Measurement programs are entered on the touch screen panel. |
| Control: | |
|---|---|
| Type of control: | Industrial PC with touch panel |
| Inputs / Outputs: | 24 VDC, with Beckhoff I/O Modules |
| Interface to robot or plant plc: | Profibus and/or parallel I/O |
| Power requirement: | 3 x 380 VAC for the complete unit |
| Turning Station | |
|---|---|
| Turning speed: | 2 seconds per revolution |
| Movements: | motors: AC-Motor, lifting: pneumatic cylinder |
| Vertical stroke wheel clamping unit: | 30 mm |
| Wheel size: | from 15 to 22 inch without manual change |
| Wheel weight: | max. 45 kg |
| Wheel type scanning: | |
|---|---|
| Type of scanning system: | NUMTEC LC – Series Laserscanner |
Image Gallery:
 |
 |
